Panasonic SCHTB350 SCHTB350 User Guide - Page 25
Panasonic SCHTB350 Manual
View all Panasonic SCHTB350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Others The following settings are unnecessary under general usage conditions of the system. ∫ To reduce the clear-mode dialog effect When the dialog does not sound natural while the volume is set low, for example, It is possible to reduce the dialog enhancing effect as follows: Press and hold [TV] on the remote control and followed by [s VOL] on the main unit for more than 2 sec. ≥ All the indicators will blink once when the clear-mode dialog effect is reduced. ∫ Remote control code When other Panasonic devices respond to this system's remote control, change the remote control code on the main unit and the remote control. Preparation ≥ Turn off all other Panasonic products. ≥ Turn on the main unit. ≥ Even if clear-mode dialog effect is reduced, dialog effect level is still adjustable. Change the remote control code to code 2: 1 Aim the remote control at this system's remote control sensor. 2 Press and hold [MUTE] and [ ] on the remote control for more than 4 sec. ≥ All the indicators will blink for 10 sec when the code of this system is changed. ∫ To turn off the volume limitation If a state of the lowered volume disturbs you every time this system turns on, for example, it is possible to turn off this function as follows: Press and hold [MUTE] on the remote control and followed by [VOL r] on the main unit for more than 2 sec. ≥ All the indicators will blink once when the volume limitation is turned off. ≥ The setting is maintained until it is changed again. ≥ If this system does not operate after changing the code, repeat steps 1 and 2. ≥ To change the remote control code to code 1, repeat the steps above, but replace [ ] with [TV]. The settings of the clear-mode dialog effect and the volume limitation remain intact even if you switch this system to standby mode. To turn these 2 functions back on, this system must be set back to the factory preset. (> 26) RQT9670 25 Operations