Panasonic SCHTB350 SCHTB350 User Guide - Page 27
Panasonic SCHTB350 Manual
View all Panasonic SCHTB350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
The dialog is too persistent or the dialog does not sound natural. This system has a function to make the dialog stand out when the volume is low. (> 25) About Bluetooth® Panasonic bears no responsibility for data and/or information that is compromised during a wireless transmission. There is no audio. The power of the main unit turns off automatically. (When the main unit detects a problem, a safety measure is activated and the main unit automatically switches to standby mode.) ≥ There is a problem with the amplifier. ≥ Is the volume extremely high? If so, lower the volume. ≥ Is this system placed in an extremely hot place? If so, move this system to a cooler place and wait a few moments and then try to turn it on again. If the problem persists, confirm the TV indicator and AUX indicator blink, turn the system off, remove the AC power supply cord and consult your dealer. Please be sure to remember the indicators that were blinking and inform the dealer. ∫ Frequency band used This unit uses the 2.4 GHz frequency band. ∫ Certification of this device ≥ This system conforms to frequency restrictions and has received certification based on frequency laws. Thus, a wireless permit is not necessary. ≥ The action below are punishable by law in some countries: j Taking apart or modifying the unit. j Removing specification indications. ∫ Restrictions of use ≥ Wireless transmission and/or usage with all Bluetooth® equipped devices is not guaranteed. ≥ All devices must conform to standards set by Bluetooth SIG, Inc. ≥ Depending on the specifications and settings of a device, it can fail to connect or some operations can be different. ≥ This system supports Bluetooth® security features. But depending on the operating environment and/or settings, this security is possibly not sufficient. Transmit data wirelessly to this system with caution. ≥ This system cannot transmit data to a Bluetooth® device. Active Subwoofer No power. Ensure the AC power supply cord of the active subwoofer is connected properly. After turning the subwoofer on, it immediately turns off. Unplug the AC power supply cord and consult your dealer. ∫ Range of use Use this device at a maximum range of 10 m (33 ft). The range can decrease depending on the environment, obstacles or interference. No sound from the subwoofer. ≥ Check that the active subwoofer is turned on. ≥ Check that the wireless link indicator lights green. (> 21) ∫ Interference from other devices ≥ When other devices use the same frequency as this system, this system may operate incorrectly or the sound may be distorted. ≥ To prevent interference from other devices: j Keep the system away from other devices that emit radio frequency interference. j Do not use this system and a wireless LAN device at the same time. Switch off any wireless LAN device. The wireless link indicator lights red. ≥ There is no link between this unit and the active subwoofer. j Check that this unit is turned on. j Turn the active subwoofer off and then back on. Alternatively, turn the active subwoofer off, disconnect the AC power supply cord and then reconnect it. ≥ The active subwoofer and the main unit may not be paired correctly. Try the following operation. (Wireless pairing) 1 Turn on the main unit and active subwoofer. 2 Press [ID SET] on the rear of the active subwoofer. (The WIRELESS LINK indicator will light red and green alternately.) 3 Press and hold [INPUT SELECTOR] on remote control and followed by [VOL r] on the main unit for more than 2 sec. (The BD/DVD indicator will blink and audio format indicators light up in sequence.) ≥ When the wireless pairing is successful, BD/DVD indicator will stop flashing and WIRELESS LINK indicator lights green. ∫ Intended usage ≥ This unit is for normal, general use only. ≥ Do not use this system near an equipment or in an environment that is sensitive to radio frequency interference (example: airports, hospitals, laboratories, etc). 4 Turn the main unit off and on. ≥ Consult your dealer if the problem persists. RQT9670 27 Reference