Panasonic SCHTB500 SAHTB500 User Guide - Page 28
Attaching this unit to a wall, Thread a cord not supplied through the wall mount bracket.
UPC - 885170013704
View all Panasonic SCHTB500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Attaching this unit to a wall 6 Thread a cord (not supplied) through the wall mount bracket. ≥ Use a cord which is capable of supporting over 20 kg (44.1 lbs). A Rear of this unit B Fall prevention cord (not supplied) 7 Attach the lock pins into the wall mount bracket. ≥ The lock pins are designed to lock the wall mount brackets to the screws that this unit is attached to. Hence, preventing this unit from falling off the screws. ≥ Keep the lock pins out of reach of children to prevent swallowing. ≥ Insert the lock pins as illustrated in the image below. ≥ Make sure that the lock pin does not get caught on the fall prevention cord. A Do not insert the lock pin farther than this point. 8 Drive 2 screws (not supplied) into the screwing positions identified in step 4. A At least 30 mm (13/16q) B ‰4.0 mm (5/32q) C ‰7.8 mm to ‰9.4 mm (5/16q to 13/32q) D Wall E 5.0 mm to 6.0 mm (3/16q to 1/4q) ≥ Take care when fixing this unit to the wall. Always ensure that there are no electrical cables or pipes in the wall before hanging this unit. ≥ Keep the screws out of reach of children to prevent swallowing. ≥ Be sure to use commercially available screws with nominal diameter of ‰4.0 mm (5/32q) suited to the wall surface material (wood, steel frame, concrete, etc.) and also capable of supporting over 20 kg (44.1 lbs) each for attaching this unit to the wall. ≥ The position in the wall where the screw is to be attached should be capable of supporting over 20 kg (44.1 lbs). ≥ Improper attachment may result in damage to the wall and this unit. 28