Panasonic SDRT55 SDRH85 User Guide - Page 38

Quick start This unit will resume recording/pause mode about 0.8 seconds after the LCD monitor is reopened. ≥ Start time will not shorten if there is no SD card inserted. SDR-T55 / SDR-T50 Start time will be shorten if the [Built-inMemory] is selected in the [MEDIA SELECT], even if there is no SD card inserted. SDR-H85 Start time will be shorten if the [HDD] is selected in the [MEDIA SELECT], even if there is no SD card inserted. ¬ Change the mode to . 1 Select the menu. (l 27) [SETUP] # [QUICK START] # [ON] 2 Close the LCD monitor while the mode is set to . ≥ Quick start standby mode is canceled if j about 5 minutes have elapsed j mode is set to ≥ It may take some time for Automatic white balance to adjust. ≥ In the Quick start mode, the zoom magnification becomes 1k. ≥ If [ECONOMY] (l 29) is set to [5 MINUTES] and the unit automatically goes into Quick start standby mode, close the LCD monitor and then open it again. ≥ Turn the unit off using the power button. Quick power on When the power is turned on with the mode set to , the unit will enter the recording pause mode after about 1.9 seconds. Select the menu. (l 27) [SETUP] # [QUICK POWER ON] # [ON] ≥ In the Quick power on mode, the zoom magnification becomes 1k.  The status indicator A flashes green and the unit goes into Quick start standby mode. 3 Open the LCD monitor. The status indicator A lights red and the unit is put into recording pause. ≥ When in Quick start standby mode about 70% of the power used in Recording pause mode is being consumed, so the recording time will be reduced. 38 VQT2L14