Panasonic SU-R1000 Owners Manual - Page 18
Using this unit as power amplifier
![]() |
View all Panasonic SU-R1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Operations Using this unit as power amplifier You can connect the AV receiver, control amplifier, etc. with analog audio cable (not supplied) to this unit and use this unit as power amplifier. Set the volume of the AV receiver, control amplifier, etc. to minimum before connecting. While using this unit as power amplifier, the volume adjustment with this unit is disabled. Adjust the volume little by little with the connected device. Do not input the audio signal from REC OUT/PRE OUT terminals to the MAIN IN terminals of this unit. Doing so may cause malfunction. Analog audio cable (not supplied) 13&065 AV receiver, control amplifier, etc. 1 Disconnect the AC power supply cord. 2 Connect this unit and AV receiver, control amplifier, etc. after minimizing the volume of the device. 3 Connect the AC power supply cord to this unit. ( 12) 4 Press the unit on/off button to the [ ] position. 5 Press [SETUP]. 6 Press [ ], [ ] repeatedly to select "MAIN IN" and then press [OK]. 7 Press [ ], [ ] to select "On" and press [OK]. 8 Confirm the displayed message and press [OK]. 9 Press [ ], [ ] to select "Yes" and then press [OK]. 10 Start playback on the connected device. Note • It is not possible to adjust the volume with this unit. • Sound is not output from headphones jack and REC OUT/PRE OUT terminals. Minimizing sound distortion If sound distortion occurs, setting the attenuator to "On" may improve the sound quality. • The factory default is "Off". 1 Press [MENU]. 2 Press [OK]. 3 Press [ ], [ ] to select "On" and then press [OK]. 18 (18)
![](/manual_guide/products/panasonic-sur1000-owners-manual-81f3737/18.png)