Panasonic SVAV50 Sd Movie - Page 68

Manager] of the Windows OS., Mass Storage Device] in [Device - blue

Page 68 highlights

Others 1: How do I send an MPEG4 moving picture recorded as e-mail? 1: Capture the moving picture data recorded on the SD Video Camera onto a personal computer and attach it to an e-mail to send it. In this case, it is recommended to make a file size 1 MB or less. The recording time of 1 MB MPEG4 moving picture is approx. 8 seconds (Super fine), 15 seconds (Fine) or 60 seconds (Economy). (The capacity limit of the file which is attachable to an e-mail differs depending on the environment used.) Even if you send the data recorded with [Extra fine], they cannot be played back without Panasonic SD Video Camera (SV-AV50, SV-AV25). If the file is played back on the personal computer, Windows Media Player 6.4 or later is required. If the file is played back on Macintosh, use the Windows Media Player for Macintosh. (Mac OS® 8.0 or later.) The Windows Media Player for Macintosh can be downloaded from Microsoft's website. 2: Red, blue, green or white dots appear on the screen. 2: 0.01% or less of the pixels of some LCD Monitors may remain turned on or off. 3: When the USB cable is connected, a green [?] mark is indicated in [USB Mass Storage Device] in [Device Manager] of the Windows OS. 3: If the USB cable is connected without installing the USB Driver (supplied), [?] will be indicated on some OSs. Remove the USB cable from the SD Video Camera and install the USB Driver according to the procedure shown on page 46, and [?] will disappear. 4: When the USB cable is removed when Windows Me is used, Device removal warning appears. 4: If the USB cable is connected without installing the USB Driver (supplied) when you use Windows Me, the warning message will appear as soon as the USB cable is pulled out. Install the USB Driver, and the warning message will not appear. For how to disconnect the USB cable on Windows XP or Windows 2000, refer to page 49. 5: The Jog Ball or others cannot be activated. 5: Check if [¥ HOLD] appears on the LCD monitor. If it does, press the [MENU] Button for about 2 or more seconds to clear [¥ HOLD] on the LCD monitor. The Jog Ball will be activated. 68

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80

68
Others
1:
How do I send an MPEG4 moving
picture recorded as e-mail?
1:
Capture the moving picture data
recorded on the SD Video Camera
onto a personal computer and attach it
to an e-mail to send it. In this case, it is
recommended to make a file size 1 MB
or less. The recording time of 1 MB
MPEG4 moving picture is approx.
8 seconds (Super fine), 15 seconds
(Fine) or 60 seconds (Economy).
(The
capacity limit of the file which is
attachable to an e-mail differs
depending on the environment used.)
Even if you send the data recorded
with [Extra fine], they cannot be played
back without Panasonic SD Video
Camera (SV-AV50, SV-AV25). If the file
is played back on the personal
computer, Windows Media Player 6.4
or later is required. If the file is played
back on Macintosh, use the Windows
Media Player for Macintosh. (Mac OS
®
8.0 or later.) The Windows Media
Player for Macintosh can be
downloaded from Microsoft’s website.
2:
Red, blue, green or white dots
appear on the screen.
2:
0.01% or less of the pixels of some
LCD Monitors may remain turned on or
off.
3:
When the USB cable is connected, a
green [?] mark is indicated in [USB
Mass Storage Device] in [Device
Manager] of the Windows OS.
3:
If the USB cable is connected without
installing the USB Driver (supplied), [?]
will be indicated on some OSs.
Remove the USB cable from the SD
Video Camera and install the USB
Driver according to the procedure
shown on page 46, and [?] will
disappear.
4:
When the USB cable is removed
when Windows Me is used, Device
removal warning appears.
4:
If the USB cable is connected without
installing the USB Driver (supplied)
when you use Windows Me, the
warning message will appear as soon
as the USB cable is pulled out. Install
the USB Driver, and the warning
message will not appear.
For how to disconnect the USB cable
on Windows XP or Windows 2000,
refer to page 49.
5:
The Jog Ball or others cannot be
activated.
5:
Check if [
¥
HOLD] appears on the
LCD monitor. If it does, press the
[MENU] Button for about 2 or more
seconds to clear [
¥
HOLD] on the LCD
monitor. The Jog Ball will be activated.