Panasonic TC-55FX800 Owners Manual - Page 12
Installing the wall, hanging bracket
View all Panasonic TC-55FX800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Installing the wallhanging bracket Please contact a professional installer to purchase the recommended UL qualified wall-hanging bracket. For additional details, please refer to the wall-hanging bracket installation manual. Accessories (wall-hanging parts) Spacer nut (2) ■ Preparation Back of the TV Holes for wall-hanging bracket installation (for 55 ") 11.8 " (300 mm) 11.8 " (300 mm) (for 65 ") 15.7 " (400 mm) 11.8 " (300 mm) (View from the side) Diameter of screw: M6 *: Depth of screw * Upper side Minimum: 0.39 " (10.0 mm) Maximum: 0.63 " (16.0 mm) Lower side Minimum: 0.31 " (8.0 mm) * Maximum: 0.51 " (13.0 mm) Screws for attaching the TV to the wall-hanging bracket (not supplied with the TV) A A When changing to installation with pedestal, remove the spacer nut. ● To remove the spacer nut, use a spanner or the like. Warning ● Always be sure to ask a qualified technician to carry out set-up. ● Do not mount the unit directly below ceiling lights (such as spotlights, floodlights or halogen lights) that typically give off high heat. Doing so may warp or damage plastic cabinet parts. ● Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in the wall before hanging bracket. ● To prevent fall and injury, remove the TV from its fixed wall position when it is no longer in use. ● Incorrect wall-hanging bracket or incorrect fitting may cause equipment to fall, resulting in injury and product damage. ● Panasonic disclaims liability for any damage or injury arising from incorrect wall-hanging bracket, incorrect fitting or otherwise failure to follow the above instructions. 12 English