Panasonic TC-55FX800 Owners Manual - Page 16
To use COMPONENT terminals, To use COMPOSITE terminals
View all Panasonic TC-55FX800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
To use COMPONENT terminals (DVD recorder / Blu-ray Disc player / etc.) Component cable AV Equipment (e.g. Blu-ray Disc player) To use COMPOSITE terminals (for SD picture) (Camcorder / Game system / DVD recorder / etc.) Network connection ● To enable the network service functions, you need to connect the TV to a broadband network environment. If you do not have any broadband network services, please consult your retailer for assistance. ● Prepare the Internet environment for wired connection or wireless connection. ■ Wired connection TV Internet environment LAN cable (Shielded) ■ Wireless connection VIDEO cable AV Equipment (e.g. Camcorder) Note ● In some cases, it is not possible to connect depending on the type of cable or equipment. ● The Green terminal is shared for both the COMPONENT and COMPOSITE (VIDEO IN) connection. When using COMPOSITE (VIDEO IN) connection, the Yellow connector (VIDEO) should be inserted into Green connection. Internet environment Built-in wireless LAN (Rear of the TV) Access point ■ About built-in wireless LAN/Bluetooth ● To use the built-in wireless LAN, using an access point is recommended. ● To use the built-in wireless LAN in the access point mode, up to 7 devices are connectable. But the transfer rate will vary according to communication environment or connected equipments. ● Do not use the built-in wireless LAN to connect to any wireless network (SSID*1) for which you do not have usage rights. Such networks may be listed as a result of searches. However, using them may be regarded as illegal access. ● Check that the Access point supports WPS*2. (If it does not support WPS, the encryption key of the Access point is required when configuring settings.) ● Follow the instructions on the Access point setup screen and configure the appropriate security settings. For more details on setting of Access point, please refer to operating manual for the Access point. ● We recommend using 11n (5 GHz) for the wireless system between the built-in wireless LAN and Access point. Communication is also possible with 11a, 11b, and 11g, but the communication speed may be slower. ● If the wireless system of the Access point is changed, devices that could connect by wireless LAN may no longer be able to connect. ● Data transmitted and received over radio waves may be intercepted and monitored. 16 English