Panasonic TC-L24X5 Owners Manual - Page 19
i!i_iii;ii!iiiti!iiiti!iii - model
View all Panasonic TC-L24X5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
"e _ O0 Before calling your dealer or service center for assistance, check the matters below once again. I. Make sure you have connected LCD TV to your equipment. 2. Check cable connection. Verify that all external equipment and power cords are properly connected. 3. Verify that all power is switched on. 4. If LCD TV still does not produce an image, re-start the external equipment. 5. If the image still does not appear, unplug LCD TV from the external equipment and check the external equipment.The problem may be with your graphics controller rather than with LCD TV. (When you reconnect LCD TV, remember to turn the external equipment and TV off before you power up LCD TV. Power the equipment back on in order of LCD TV and external equipment.) 6, If the problem still exists, check the following chart. iiiii'i!iii_i!iiiti!iiitiii!iiiit!ii_iii;'_ii!@iiit_i!iiiti!iii NO POWER Plug this LCDTV into the AC outlet. Press POWER button on side control or on Remote Control to turn on LCDTV. ® Check POWER Indicator. If this indicator no light, this TV has Remote Control does qettinq trouble. Check the batteries. not work ® Make sure nothing is between the Remote Receiver and the Remote Control. ® Make sure you are not too far from LCDTVwhen using Remote Control. ® Maximum operating range is (7m and a 30 degree angle of the front of the TV). ® Is direct sunlight or strong artificial light shining on LCD TV's Infrared Remote Receiver? Eliminate the light by closing curtains, pointing the light in a different direction, etc. ® A dedicated remote control is required for this model. Basically, the remote control of other brands (including Panasonic other models) cannot be used. No image No sound There are tiny black points and/or bright point on theTV Abnormal color of imaqe Check the connection between the external equipment and LCD TV. When turning LCDTV on, it takes a few seconds to display the image. Check the system that you select is corresponding with the external equipment equipment. or the video Make sure the temperature is not out of the Operating Temperature 32 °F - 95 °F (0 °C - 3S °C). Turn off power, then turn on aqain_ re-start LCD TV. Check Audio cable connection from Audio input source. Adjust the Sound System. Press VOLUME (+) button. Press MUTE button. Dark or bright points of light (red, green, or blue) may appear on the screen.This is a characteristic of the LCD panel, not a malfunction of the LCDTV. LCD panel is produced with very high accuracy technology. There is 99.99% or more dot pixel, but there is also 0.01% or less of dot pixel lack or dot pixel that is constantly defect. lighted.This is not Regarding LCD panel characteristic, it may occur picture remain (look like a mirror when the screen is changed if it displays same screen for a long time. Changing the picture or turn-off the power supply may recover. Stripe pattern (more, interference stripes) may show up on the screen depends on the reflected picture. Adjust the value of color. ( Warning High voltages are used to operate this LCD TV. Do not attempt to open the cabinet. If the problem still persists after following all operating instructions, contact the sales dealer where you purchased LCD TV or the service center. Give the model number and explain the difficulty. We will advise you how to obtain service. 19