Panasonic TH-46PZ85 Operating Instructions - Page 3

Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrowhead within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons. The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not place liquid containers (flower vase, cups, cosmetics, etc.) above the set (including on shelves above, etc.). Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments / accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15) To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected. FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: To assure continued compliance, use only shielded interface cables when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by Panasonic Corporation of North America could cause harmful interference and would void the user's authority to operate this device. FCC Declaration of Conformity Model No. TH-42PZ85U, TH-46PZ85U, TH-50PZ85U Responsible Party: Contact Source: email: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Panasonic Consumer Electronics Company 1-888-VIEW-PTV (843-9788) [email protected] CANADIAN NOTICE: For Model TH-42PZ85U, TH-46PZ85U, TH-50PZ85U This Class B digital apparatus complies with Canadian ICES-003. 4 WARNING/CAUTION WARNING If problems occur during use If a problem occurs (such as no picture or no sound), or if Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. discard unneeded small parts and other objects, including packaging materials and plastic bags/sheets to prevent them from being played with by young children, creating the potential risk of suffocation. smoke or an abnormal odor is detected from the Plasma TV, unplug the power cord immediately. Continued use of the TV under these conditions might cause fire or permanent damage to the unit. Have the TV evaluated at an Authorized Service Center. Servicing of the TV by any unauthorized personnel is strongly discouraged due to its high voltage dangerous nature. If water or foreign objects get inside the Plasma TV, if the Set up Do not place the Plasma TV on sloped or unstable surfaces. The Plasma TV may fall off or tip over. Do not place any objects on top of the Plasma TV. If water spills onto the Plasma TV or foreign objects get Plasma TV is dropped, or if the cabinet becomes damaged, disconnect the power cord plug immediately. A short may occur, which could cause fire. Contact an Authorized Service Center for any repairs that need to be made. inside it, a short-circuit may occur which could result in fire or electric shock. If any foreign objects get inside the Plasma TV, please consult an Authorized Service Center. CAUTION This Plasma TV is for use only with the following optional Do not cover the ventilation holes. accessories. Use with any other type of optional accessories may Doing so may cause the Plasma TV to overheat, which can cause instability which could result in the possibility of injury. cause fire or damage to the Plasma TV. (All of the following accessories are manufactured by Leave a space of 3 15/16" (10 cm) or more at the top, left Matsushita Electric Industrial Co., Ltd.) and right, and 2 3/4" (7 cm) or more at the rear. • Wall-hanging bracket (Vertical) TY-WK42PV4W When using the pedestal, keep the space between the • Wall-hanging bracket (Angled) TY-WK42PR4W bottom of the TV and the floor surface. Always be sure to ask a qualified technician to carry out set-up. Two or more people are required to install and remove the television. If two people are not present, the television may be dropped, and personal injury may result. Transport only in upright position! Transporting the unit with its display panel facing upright or downward may cause damage to the internal circuitry. When using the Plasma TV Be sure to disconnect all cables before moving the Plasma TV. Moving the TV with its cables attached might damage the cables which, in turn, can cause fire or electric shock. Disconnect the power plug from the wall outlet as a safety AC Power Supply Cord The Plasma TV is designed to operate on 120 V AC, 60 Hz. Securely insert the power cord plug as far as it will go. If the plug is not fully inserted, heat may be generated which could cause fire. If the plug is damaged or the wall socket plate is loose, they should not be used. The included power cord is for use with this unit only. Do not use any power cord other than that provided with this TV. Doing so may cause fire or electric shocks. Do not handle the power cord plug with wet hands. Doing so may cause electric shocks. Do not do anything that might damage the power cable. When disconnecting the power cable, hold the plug, not the cable. Do not make any modifications to, place heavy objects on, place near hot objects, heat, bend, twist or forcefully pull the power cable. Doing so may cause damage to the power cable which can cause fire or electric shock. If damage to the cable is suspected, have it repaired at an Authorized Service Center. precaution before carrying out any cleaning. Electric shocks can result if this is not done. Clean the power cable regularly to prevent it from becoming dusty. Built-up dust on the power cord plug can increase humidity which might damage the insulation and cause fire. Unplug the cord from the wall outlet and clean it with a dry cloth. This Plasma TV radiates infrared rays; therefore, it may affect other infrared communication equipment. Install your infrared sensor in a place away from direct or reflected light from your Plasma TV. Do not climb up onto the television or use it as a step. (Young children should be made particularly aware of this caution.) If the unit falls over or becomes damaged through misuse, injury may result. The TV will still consume some power as long as the power cord is inserted into the wall outlet. Notes Do not display a still picture for a long time This causes the image to remain on the plasma screen ("Image retention"). This is not considered a malfunction and is not covered by the warranty. Typical still images Channel number and other logos • Image displayed in 4:3 mode SD Card photo ɹ Video game ɹ Computer image 4 : 3 12 To prevent "Image retention", the screen saver is automatically activated after a few minutes if no signals are sent or no operations are performed. (p. 51) ■ Setup Do not place the unit where it's exposed to sunlight or other bright light (including reflections). Use of some types of fluorescent lighting may reduce the remote control's transmission range. 5