Panasonic TH-50PZ700 Operating Instructions - Page 14

Displaying PC Screen on TV The screen of the PC connected to the unit can be displayed on the TV. You can also listen to PC sound with the audio cable connected. To connect PC (p. 42) 1 Display the Input select menu Input select 1 TV 2 Component 1 3 Component 2 4 HDMI 1 5 HDMI 2 6 Video 1 7 Video 2 8 Video 3 9 PC 2 Select "PC" PC ■To return to TV •Corresponding signals (p. 53) Displays PC screen ■PC menu setting (changed as desired) •Making settings "How to Use Menu Functions" Menu Item to (p. 28) Adjustments/Configurations (options) Normal Sync Resets PC adjust (Set/No) ••H & V: The H and V sync signals are input from the HD/VD connector. (p. 53) On G: Uses a synchronized signal on the Video G signal, which is input from the G connector. (p. 53) Dot clock Alleviates the problem if a picture appears to be vertically-striped, flickers partially or is blurred. H-position Adjust the horizontal position. Picture PC adjust V-position Adjust the vertical position. Clock phase Alleviates the problem if the whole picture appears to flicker or is blurred. First adjust the Dot Clock to get the best possible picture, then adjust the Clock Phase so that a clear picture appears. Note It may not be possible to display a clear picture due to poor input signals. Input resolution ••Switches to wide display. Input signal switched from VGA to WVGA Input signal switched from XGA to WXGA H-frequency V-frequency •Displays the H (Horizontal)/V (Vertical) frequencies. Display range Horizontal: 15 - 110 kHz Vertical: 48 - 120 Hz ••Audio menu (p. 28) For PC input, only audio signals can be output from PROG OUT terminals. Viewing Displaying PC Screen on TV 26 27