Panasonic Toughpad FZ-G1 Operating Instructions - Page 29

Otherwise installation may become unavailable as Windows may not start up or the data may be corrupted. 13 When Ending process screen is displayed, touch [OK] to turn off the computer. 14 Turn on the computer. l If the password is requested, enter the Supervisor Password. 15 Perform the "First-time Operation" ( page 20). 16 Start the Setup Utility and change the settings as necessary. 17 Perform Windows Update. n Using Recovery Disc Use the Recovery Disc in the following conditions. Ÿ You have forgotten the administrator password. Ÿ Installation is not complete. The recovery partition in the flash memory may be broken. Ÿ To change OS from Windows 7 to Windows 8, or vice versa. NOTE l To change OS from 32 bit to 64 bit, or vice versa, install OS using the recovery partition in the flash memory. Preparation l Prepare the following items: • R ecovery Disc ( Reference Manual "Recovery Disc Creation Utility") • U SB DVD drive (optional) (refer to recent catalogs and other sources for information about the products available) l Remove all peripherals (except for the USB DVD drive). l Connect the AC adaptor and do not remove it until installation is complete. NOTE l You can use the following buttons instead of the keyboard. : F2 key (Default setting) : ↓ key : ↑ key : Enter key : Tab key 1 Connect the DVD drive to the USB port. 2 Start the Setup Utility. Useful Information A Display "Charm" and touch - [Change PC settings] - [General]. B Touch [Restart now] under "Advanced startup". C Touch [Troubleshoot] - [Advanced options] - [UEFI Firmware Settings] - [Restart]. Turn on the computer, and touch top left of the screen while [Panasonic] boot screen is displayed. l If the [Panasonic] boot screen is not displayed, turn on the computer while touching top left of the screen. 29