Panasonic WJ-GXD400 Installation Guide - Page 23

Problem The power cord insulation is damaged. The power cord, plug and connectors get hot during use. The power cord gets hot when bent or stretched. No live image is displayed. Check item/Remedy • The power cord, plug and connectors are worn out. This may result in electric shock or a fire. Unplug the power plug from the AC outlet immediately, and refer to qualified service personnel. Page - • An error notification (message) is displayed. Check the displayed message and contact the system administrator. • Images from cameras may not sometimes be displayed when receiving MPEG-4 images via the Internet. Check the settings of the router or other network devices. Contact the network administrator. - • Check the following settings of both the decoder and the network cameras. • IP address • Subnet mask • Default gateway 23