Panasonic WJ-HDE400/3000T3 Installation Guide - Page 21

■ HDD Unit To install a hard disk drive in the extension unit, it is necessary to assemble an HDD unit (encase the hard disk drive in the HDD canister). The HDD unit is designed to easily install/remove the hard disk drive in/from the extension unit. Contact your dealer about purchasing, installing, and replacing the hard disk drives. HDD canister HDD Anti-static mat (1) Put the cushion between the front cover and HDD canister. Cushion (2) Put the cushions between the extension unit and inner box. Important: • Hard disk drives are precision devices. Before installing the hard disk drives, read the "Hard disk drive" section of "Precautions (page 7)" together with the following. • Before touching a hard disk drive, release static electricity from your body using an anti-static grounding strap, etc. Even after releasing static electricity, hold the side of the hard disk drive when carrying it. To prevent damage to the hard disk drive from static electricity, do not touch the circuit board and the connectors of the hard disk drive. • Use an anti-static mat and an anti-static grounding strap when installing/replacing the hard disk drives. • When installing hard disk drives, use a low-torque powered screwdriver or a torque screwdriver to tighten screws with the specified torque. • The hard disk drive and the HDD canisters should be packaged in exclusive cushioning. The hard disk drive and the HDD canisters may be damaged by a fall or vibration. When transporting the extension unit, put these cushions from the extension unit and pack them again in the following method. Inner box Cushion (3) Put the corner cushions between the inner box and outer box. Corner cushion Inner box Outer box 21