Panasonic WJHD220 WJHD220 User Guide - Page 32

G Password Lock Setup (PASSWORD LOCK) A five-digit password is entered to protect all settings, recorded pictures, and operating status against erroneous operation and tampering. Settings alone can be also protected from unauthorized access. While the LOCK indicator on the front panel is on, a message "NOW KEY LOCKED!" is displayed to warn unauthorized operators. If accessed in this condition, the buzzer beeps. OPERATE ALARM TIMER SUSPEND REMOTE RESET LOCK DST OSD SE SYSTEM SETUP (1 OF 2) PASSWORD LOCK OFF ALL→ ***** OPERATION→ ***** KEYLOCK BUZZ ON SKIP ALM-RECALL 1PAGE SIMUL REC&PLAY ON ALTER DETECT OFF DISK END MODE CONTINUE DISK END BUZZ ON 1. Move the cursor to PASSWORD LOCK with the [D] or [C] button. 2. Select either ON or OFF with the JogDial, and press the JogDial. The default is OFF. ON: The buttons are password protected. The recorder enters the button lock mode if neither a button nor the JogDial is operated within a period of five minutes. OFF: No password protection is applied. 3. Move the cursor to ALL→ or OPERATION→ with the [D] or [C] button. ALL: Allows both normal operations and setup operations. OPERATION: Allows only normal operations. Setup operations are not allowed. 4. Press the JogDial. The preset password appears. The default is "12345" for both ALL and OPERATION. 5. Select a digit, rotating the JogDial. 6. Enter a number with the numeric button, and press the JogDial. The cursor moves one digit to the right. 32 7. Repeat steps 5 and 6 until all digits are entered. 8. Press the [SETUP/ESC] button to confirm the entered password. Go back to step 3 if you have not yet set the OPERATION password. G Keylock Buzzer Setup (KEYLOCK BUZZ) SYSTEM SETUP (1 OF 2) PASSWORD LOCK OFF ALL→ ***** OPERATION→ ***** KEYLOCK BUZZ ON SKIP ALM-RECALL 1PAGE SIMUL REC&PLAY ON ALTER DETECT OFF DISK END MODE CONTINUE DISK END BUZZ ON 1. Move the cursor to KEYLOCK BUZZ with the [D] or [C] button. 2. Select either ON or OFF with the JogDial, and press the JogDial. The default is ON. ON: Buzzer beeps when unauthorized access takes place. OFF: Buzzer does not sound. G Skip Alarm Recall Setup (SKIP ALARM RECALL) Alarm log pages are recalled on the monitor when the JogDial is pressed for 2 seconds. When searching in the log, you may need to skip pages. The page will skip the specified number forward or backward from the displayed page when rotating the JogDial. SYSTEM SETUP (1 OF 2) PASSWORD LOCK OFF ALL→ ***** OPERATION→ ***** KEYLOCK BUZZ ON SKIP ALM-RECALL 1PAGE SIMUL REC&PLAY ON ALTER DETECT OFF DISK END MODE CONTINUE DISK END BUZZ ON 1. Move the cursor to SKIP ALM RECALL with the [D] or [C] button, and press the JogDial. 2. Select the number of skip pages with the JogDial, and press the JogDial. The default is 1 page. Available skip pages: 1, 5, 10, 20, 50 pages