Panasonic WJND300A WJND300A User Guide - Page 51
Perform the settings for site alarm [Site Alarm Setup], Step 1, Site Alarm, Port Number from Camera
View all Panasonic WJND300A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Perform the settings for site alarm [Site Alarm Setup] Perform the settings relating to the site alarm such as the setting to validate or invalidate the original alarm from cameras, the port number used for receiving the original alarm, and the event actions for each camera channel at an original alarm occurrence. Screenshot 1 Click the [Event] button in the setup menu (Advanced) and then click "Site Alarm Setup" to display the "Site Alarm Setup" window. Step 1 Perform the settings for each item. I Site Alarm Select "ON" or "OFF" whether to validate or invalidate the site alarm. ON: Validates the site alarm. OFF: Invalidates the site alarm. I Port Number (from Camera) Designate the port number to be used for receiving the site alarm. I Site Alarm Setup Perform the settings for the following items for each camera channel. [REC CAM] Performs the settings for a camera channel currently used for recording. [PRESET] Enter a preset position (blank, 1-256) to which the camera will move at an alarm occurrence. When no position is entered (blank), the camera does not move to any preset position. [Output Terminal] Select the output terminal (--, TRM1-TRM16) that outputs alarm signals at an alarm occurrence. When "--" is selected, alarm signals will not be output. Step 2 Click the [SET] button after completing the settings. 51