Panasonic WV-CW594 Installation Guide - Page 19
Step 9, Step 10
View all Panasonic WV-CW594 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Important: • Joint both sides of the front and rear sunshields before fitting in the main sunshield. • Do not trap the safety wire inside. • The safety wire is designed to support only the weight of the camera when the camera falls. Do not put an excessive weight that the safety wire cannot support. STEP 9 Fit the front and rear sunshields in the main sunshield. • Align " " of the rear sunshield to " START" of the main sunshield. Then, turn the front and rear sunshields toward "LOCK" until a click is heard. Front and rear sunshields (accessory) Main sunshield Align " " to " ". STEP 10 Fix the front and rear sunshields on the camera using the front/rear sunshield fixing screw (accessory). (Recommended tightening torque: 0.72 N·m) Front and rear sunshields fixing screw (accessory) Important: • When the power of the camera is turned on, the camera will start panning and the position will automatically be initialized. Note: • When removing the front and rear sunshields, perform steps 8 to 10 in the reverse order. 19