Panasonic WVCU650 WJSX150 User Guide - Page 34

TIME-LAPSE VCR CONTROL MUX [PANASONIC MODELS] (TERMINAL MODE) A time-lapse VCR (Panasonic Models) is operable with the system controller, while connecting to the matrix switcher. Note: Before the use, it is necessary to install the Multiplexer board in the matrix switcher, connect the matrix switcher to the time-lapse VCR, and configure the system through WJ-SX150A Administrator Console, OSD SETUP MENU, and time-lapse VCR's SETUP MENU. (Refer to the operating instructions of matrix switcher.) The following is the procedure of a Panasonic model timelapse VCR. ● Rewind 1. During the stop, execute System Function 12. (Refer to the operating instructions of system controller for how to operate.) The tape will be rewinded. 2. Press the STOP button to stop rewinding. Note: Pressing the PLAY/PAUSE button during rewind will start playback. ● Manual Recording The operations are the same as WJ-HD500 Series. Refer to p. 20 Manual Recording. ■ Controlling the Time-lapse VCR The following are the operating procedures of the timelapse VCR via system controllers. ● Multiscreen Segment Switching The operations are the same as WJ-HD500 Series. (Refer to p. 19.) Note: 7-, 10-, and 13- segment multiscreen display patterns are unavailable. ● Stopping REC ONLY Alarm Recording The operations are the same as WJ-HD500 Series. Refer to p. 20. ● Normal Playback The operations are the same as WJ-HD500 Series. (Refer to p. 19.) Note: You cannot skip to the previous/next record. ● Fast-forward 1. During the stop, execute System Function 11. (Refer to the operating instructions of system controller for how to operate.) The tape will be fast-forwarded. 2. To stop fast-forwarding, press the STOP button. Note: Pressing the PLAY/PAUSE button during fast-forward will start playback. 34