Pentax 205570 User Guide - Page 28
Connecting to Your Computer, Via USB Cable
UPC - 700908001030
View all Pentax 205570 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Connecting to Your Computer There are at least two ways to connect your PocketJet to your computer. USB cable and Infrared (IrDA) are both supported. Optionally, you can connect via a wireless Bluetooth connection if your printer is factory-configured for this method and your computer has Bluetooth installed. Via USB Cable CAUTION: Install the driver software before connecting the printer to the computer via the USB cable. 1. Make sure your printer is off before installing the interface cable. 2. Take the printer end of the cable and hold it so the notched metal surface is facing up. 3. Insert the printer end of the cable into the interface connector on the side of the printer. See example, Figure 7. FIGURE 7. Connecting the PocketJet to your computer CAUTION: Always insert and remove the interface connector gently. Press the latching devices on each side of the interface connector when removing the cable. 4. Connect the other end of the cable to the USB port on your computer. Note 1: USB is not supported for Windows 95. Note 2: For Windows 98/98-SE, USB printing requires installing Microsoft's USBPRINT solution. To install this software: Page 16