Pentax 205570 User Guide - Page 68

Self-Test Feature,

Get Pentax 205570 - PocketJet 3 B/W Direct Thermal Printer PDF manuals and user guides
UPC - 700908001030
View all Pentax 205570 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 68 highlights

continues to fail in the same way, it is likely that the file itself is corrupt and should be replaced with a clean copy of the file. In rare cases, when the printer is not being flashed, this error may indicate bad memory components or other problems that require printer service. Self-Test Feature The Self-Test Feature can be used to print a letter-size page test page without connection to a host computer. The test page (see page 34) contains firmware level, image quality, and configuration information. 1. To print a test page, the printer must be turned on and idle, and paper must not be loaded in the printer. 2. Press the main switch for two seconds and release to place the printer in "Service Mode". The red DATA light will illuminate. 3. Insert a piece of Pentax Quality paper in the printer. The test page will print automatically. After the print is complete, the printer will return to an idle state. 4. To print multiple pages, repeat steps 1~3. Note: Test pages can also be printed from the Windows based Configuration Utility provided on the CD. Page 56

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
continues to fail in the same way, it is likely that the file itself is
corrupt and should be replaced with a clean copy of the file.
In rare cases, when the printer is not being flashed, this error may
indicate bad memory components or other problems that require
printer service.
Self-Test Feature
The Self-Test Feature can be used to print a letter-size page test
page without connection to a host computer.
The test page (see
page 34) contains firmware level, image quality, and
configuration information.
1.
To print a test page, the printer must be turned on and idle,
and paper must not
be loaded in the printer.
2.
Press the main switch for two seconds and release to place the
printer in “Service Mode”.
The red DATA light will
illuminate.
3.
Insert a piece of Pentax Quality paper in the printer.
The test
page will print automatically.
After the print is complete, the
printer will return to an idle state.
4.
To print multiple pages, repeat steps 1~3.
Note:
Test pages can also be printed from the Windows based
Configuration Utility provided on the CD.
Page 56