Pentax A3000 A3000 Manual - Page 25
shutter/aperture
View all Pentax A3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
WARNING INDICATIONS IN VIEWFINDER Shutter speed display P.. ..1000 P 30 1000 30 What it means This combination is beyond the meter coupling range in the Programmed AE mode. Results in incorrect exposure. "1000" or "30" flickers fast to warn you of the error. Indicates the exposure combination is beyond the metering rangesir shutter/aperture coupling range. When beyond the metering range, you can shoot by changing the f-stop. When beyond the shutter/aperture coupling range, the flickering will continue even if the f-stop is changed. Shooting with this warning on display will result in incorrect exposure. "1000" or "30" flickers at a fast speed. P 30 30 P When the subject is dark, "30" flickers slowly, warning you against camera shake. When the lens is A-locked and the mode selector is set at "V or "60," "P" flickers, warning you of the error • Various warnings are indicated by the glowing of the LED's in the viewfinder, or by the beeping sound. • The out-of-metering-range refers to the exposure situation in which the subject is too dark or too bright for the camera's meter to measure the light. • The out-of-shutter/aperture-coupling-range refers to the situation in which the combination of shutter speed and aperture is beyond the limit of use even when it is within the metering range. • Refer to page for Metering Range and Shutter/Aperture Coupling Range. • The symbol in the table indicates flickering. Out of metering range When the viewfinder indicates this warning, you are recommended to take the following measures to obtain proper exposure: • When the subject is too bright, use an ND filter which enables you to control the amount of light. • When the subject is too dark, use a flash or some other lightings. 21•