Pentax A3000 A3000 Manual - Page 32
Pentax A3000 Manual
View all Pentax A3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
When set in Aperture-priority AE mode • Set the lens aperture to the f-stop indicated by the calculator on the flash. • When the S mark appears in the viewfinder while you are keeping the shutter button depressed half-way, it indicates that the flash has been charged, and the shutter speed is automatically set to 1/60 sec. Auto Flash Check mark ( $ ) When a proper flash photo has been taken, the mark in the viewfinder disappears for an instant just after the flash firing and lights up again or flickers, indicating the completion of a proper flash photography. The AF200SA does not have this Auto Flash Check function. • As shown in the table on page 27, when the camera is set to the Programmed AE mode and used with the AF20OT in its red AUTO mode, the aperture is automatically set to f/2.8 with ISO 100 film. In such a case, avoid using a lens with the smaller aperture such as f/4; otherwise, underexposure may result. • 28