Pentax IQZoom 28W IQZoom 28W Manual - Page 15

4019 LAMP INDICATIONS 0 0 0 0 Notes: • If the subject is too close, the green lamp blinks. Adjust the camera-to-subject distance so that the green lamp lights continuously, then release the shutter. • If the subject is even closer, the green lamp may light continuously, even though proper focus cannot be obtained. When you depress the shutter release button halfway down, the lamps 0 and/or 0 lights up or blink as shown above. 0 Green lamp: When the subject is in focus, it will light up to indicate that you can take the picture; when the subject is not in focus, it will blink, indicating that you cannot take the picture because the camera-to-subject distance is too close. Red lamp: When the flash is ready to discharge, it will light up. When the flash is being charged, it will blink. 11