Pentax IQZoom 70R IQZoom 70R Manual - Page 36
Battery, Exhaustion, Warning
![]() |
View all Pentax IQZoom 70R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
BATTERY EXHAUSTION WARNING • Keep spare batteries on hand for convenience when shooting outdoors or while travelling. When the batteries are nearly exhausted, the battery mark ( fJ ) appears on the LCD panel to warn you. Replace the batteries as soon as possible. When ( ) starts flickering, no operations can be performed. The battery mark ( Cj ) appears during operation of the shutter release button Of zooming lever. Battery life (using 24-exposure film rolls): Ordinary picture taking mode, 50% of shooting employs flash Approx. 30 rolls (The CR-123A batteries were used based on our own test conditions. Actual battery life/performance may vary drastically depending on either usage of Auto-Focus, Power Zoom and Flash and external conditions such as temperature and freshness. Notes on replacing the batteries: • Make sure there is no film loaded. Switch off power by setting the main switch to ( CI) before replacing the batteries. • If the batteries are replaced with film already loaded, the camera enters the starting mode. It will assume the film has been just loaded and will advance several frames. •Batteries power both the camera's main unit and the data-imprinting section. After replacement, confirm that the data on the LCD panel is correct. Refer to page 30 for data correction. Refer to page 33 for battery replacement.
![](/manual_guide/products/pentax-iqzoom-70r-iqzoom-70r-manual-dab9ac3/36.png)