Pentax IQZoom60S IQZoom 60S Manual - Page 20

USING THE SELF-TIMER 6 1. Compose your picture with the camera on a steady support. 2. Press the mode switch until 0 appears on the LCD panel. Press the shutter release button. The self-timer LED which is located on the front of your camera, will blink for approximately 7 seconds, the LED will light on for about 3 seconds to indicate that the shutter will be released and then the shutter will release. • The self-timer can cancelled by pressing the shutter release button again, or by turning off the power before shutter release. 19 AUTO FILM REWIND 1. The film will automatically rewind when the end of the roll is reached and the lens will retract into the camera. 2. Rewinding will automatically stop after the film is completely rewound, and "0" and "o" will blink on the film counter LCD. Make sure that the blinking ® appears before opening the back cover. Open the back cover and remove the film. • If the film has gone past the standard number of exposures, the final two pictures may be double exposed. • If "0" does not display on the LCD counter after rewinding, press the mid-roll rewind button. MID-ROLL REWIND (Fig. 16) The film may be rewound before the roll is finished. Use the protruding part of the strap clip to press mid-roll rewind button to rewind the film.