Pentax PC-33 PC-33 Manual - Page 11
Setting, Speed, Loading, Holding, Camera
View all Pentax PC-33 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
SETTING THE FILM SPEED (Fig. 4) 1. This camera is designed to use DX-coded films with ISO ranging from 100 to 400. 2. Your camera automatically sets the correct film speed by reading black-and-silver patterns on the film cassettes. The camera is ready for you to take a picture. (Fig. 7) * Whether there is film in your camera or not can be confirmed by the Film Check Window. LOADING THE FILM 1. Push the Back Cover Lock downword to open. (Fig. 5) 2. Load the film cassette into the Film Chamber and pull out enough film leader to extend past the Film Leader Mark. (Fig. 6) 3. Make sure the film stays within the Film Guides and lies flat. 4. Press the Back Cover shut so that the Back Cover Lock returns to its original position. when "1" appears in the Film Counter Window. HOLDING YOUR CAMERA (Fig. 8) Always use both hands to steady your camera. * When holding the camera vertically always position it with the flash at the top. Be careful not to place your fingers over the lens, flash or focusing window. 10