Pentax Super Program Super Program Manual - Page 33
Pentax Super Program Manual
View all Pentax Super Program manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
SHUTTER DIAL The shutter dial is automatically locked when set at the AUTO or M position. To select other positions (L, 125X or B), rotate the shutter dial while depressing the shutter dial lock release, and match the index (red line) to the desired position. The following modes are available according to the position of the shutter dial. AUTO Programmed AE mode Aperture-priority AE mode M Shutter-priority AE mode Metered Manual mode AUTO r-- n125\ _ J X B' 125X Shutter-priority AE mode with the speed fixed at 1/125 sec. Manual shutter speed select button In the Shutter-priority AE or Metered Manual mode, select the desired shutter speed by depressing either of the two buttons next to the shutter dial. The digital figure on the shutter speed LCD indicator increases or decreases step by step as you press the buttons. The front button stops at 2000 (1/2000 sec.), and the rear button at 15" (15 secs.). )x B" Precautions for shutter speed If you shoot at shutter speeds slower than 1/60 sec. (30 - 15" on the LCD), you may occasionally get blurred pictures. If you couldn't use a faster shutter speed due to light conditions, the use of a tripod or flash unit is recommended. The use of film with higher sensitivity will also help avoid such low shutter speeds. )125' #3` 29 •