Pentax Super Program Super Program Manual - Page 42
Pentax Super Program Manual
View all Pentax Super Program manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
SELECTING THE METERED MANUAL MODE ?So ft m co 10 15 3 I I 22 18 8 4 4 8 18 22 22 16 11 8 5.8 4 2.8 • Set the shutter dial red-line index to "M" (manual) and select the desired shutter speed. The shutter speed will be displayed on LCDs both outside the camera and inside the viewfinder. • Rotate lens aperture ring to an F value. Should the lens be locked at A (auto), release it by depressing the aperture auto lock button. • Slightly depress the shutter release button, and you will see one of the following indications (+3, +2, +1, ±0, -1, -2, or -3) displayed on the aperture value window in the viewfinder. These figures show the steps of over- or under-exposure (EV value). + = over-exposure = correct exposure - = under-exposure Should the lighting condition go over the limit of three steps, the +3 or -3 indication fl ickers. Hirn W 10 15 -I I I II II I I I te 84148 If 16 11 8 5.8 4 • 38 • For normal shooting, adjust the lens aperture so that correct exposure, indicated by •0, is obtained. Should you select the lens aperture prior to the shutter speed, adjust the shutter speed to obtain the correct exposure. If you prefer over- or under-exposure, you can freely select any Ei` exposure applying the indication as a guidance. As soon as the meter switch is turned off by the built-in timer, the aperture indication goes out, but the shutter speed display remains on.