Pentax Super Program Super Program Manual - Page 37
Pentax Super Program Manual
View all Pentax Super Program manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Programmed AE mode warnings When the programmed combination of shutter speed and aperture value is beyond the meter coupling range, the camera displays two warnings. s, I 'F () too*, .. I I F22 Both shutter speed and aperture flickering at high values. This indicates that the light situation exceeds the Super Program's light measuring ability since subject brightness is extremely high. To get a proper exposure, use another film with lower sensitivity or an ND filter. Should you happen to shift the shutter dial to "B" (Bulb), a flickering "E" (Error) warning appears on the shutter speed LCD. The shutter cannot be released even if the button is depressed. When you are using dedicated flash (TTL Auto, or Programmed Auto) in Programmed AE mode, the displays of shutter speed and aperture value are replaced by displays for flash photography when the flash is ready to fire. IP So F 2. 8- 1-d. 125$ F4 P2" F i.4 Both flickering at low values. The subject is extremely dark and below the lowest limit of the Programmed AE mode's meter coupling range. Use a higher speed film, flash or some other illumination source to throw more light to the subject. 330