Pfaff 1221 Owner's Manual - Page 17

When you've finished sewing flick the presser bar litter to its highest pnsi tion. Since this lever has been menttoned repeatedly so far, were now going to tell you how it works when set at its various posi tions 1 PositIon A lillustrrited belowt is used for threadinq the needle 500 removing the fnhrin, In this position, the sewing foot is raised and the sewing mechanism disengaged for bobbin winding. The needle is raised autorni,caIty to its highest point. .J: . . -'r- --- 1 I ' 3. Position C (illustrated below) means that the sewing foot Is lowered. When you push the presser bar litter to position 0, the Stop matic mechanism is engaged (as in position A). This position is used when the bobbin thread is to be drawn up, in case of seam interruptions, when the bobbin becomes empty, or when the bobbin thread breaks. Hold the presser bar lifter in its lowest posi tion until the needle has stopped at its high est point. When this lover is released, it re turns automatically to position C. 2 PosItion B (illustrated above) is used when you need to turn the fabric. The sewing foot is raised. hot the needip remains in the fabric and serves as a pivot point for turning the material. (i,F4FF) 1222