Pfaff 362-261 Owner's Manual - Page 31
Trouble, Shooting
View all Pfaff 362-261 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Trouble Shooting 1. Machine Skips Stitches Cause: Needle incorrectly inserted. Wrong needle. Needle bent. Machine threaded improperly. Needle too fine or too thick for the thread. Remedy: Push needle up as far as it will go and be sure that the long groove faces toward you, and flat side of shank away from you. The correct needle system is stamped on bed side, (For ordinary sewing, use System 130R needles.) Insert new needle. Check and correct threading as instructed on pages 16 and 17. Use correct needle and thread. 2. Needle Thread Breaks Cause: The above mentioned may cause thread breakage. Thread tension too tight. Poor, knotty or rotten thread used. Hook raceway is jammed with thread or needs oiling. Burrs or sharp edges on needle plate solt. Remedy: See remedies listed under 1. above. Adjust tensions as instructed. Use good quality threads only. Clean and oil hook raceway. Polish needle plate slot with fine emery cloth. 30