Pfaff 362-261 Owner's Manual - Page 51
Pfaffdealer.
![]() |
View all Pfaff 362-261 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
I R 6121 53670 I, Darning Woolen Articles Machine Setting: Stitch width dial A=2 Needle position lever B= 4 Attach darning foot, as instructed on page 24, drop machine feed, and lower presser bar lifter. Since your machine is fitted with a vibrator, there is no need to place the fabric into darning hoops. Simply guide it under the needle free-hand. For darning woolen socks, pullovers and other woolen articles on the free darning arm, use a filler thread the some color as the article to be darned. Lace filler thread through the hole in the foot. Place thread bock and forth across damaged spot and anchor it in unworn area. Sew across filler thread with zigzag stitches. Darning without Foot Machine Setting: Stitch width dial A=0 Needle position lever B= 4 I Prepare your machine for darning as follows: Remove presser foot and drop machine feed. Use feed cover plate No. 60407 to increase tautness of fabric in hoops and permit free movement. To fasten the feed plate to the machine, slip its finger into the hole in the front edge of the needle plate. Place fabric into darning hoops. This technique is used primarily to darn small holes in delicate fabrics, such as nylon. You can buy the cover plate Na. 60407 at your Pfaffdealer. R 6067 50
![](/manual_guide/products/pfaff-362261-owners-manual-e2922d3/51.png)