Pfaff 362-261 Owner's Manual - Page 50
Triangular
View all Pfaff 362-261 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
53670 Darning Machine Setting: Stitch width dial A=0 . Needle position lever B=+ Attoch doming foot, as instructed on page 24, drop machine feed, and lower presser bar lifter. Since your machine is fitted with a vibrator, there is no need to place the fabric into darning hoops. Simply guide it under the needle free-hand. Use a thin No. 70 needle. .4 The free darning arm is ideal for darning tubular articles, such as sleeves, Stitch back and forth across the hole, first lengthwise, then crosswise. trouser legs and socks. Remember that "a stitch in time saves nine" and reinforce spots that have worn thin with short stitches made lengthwise and across worn section at high speed. DR 150 DR 089 DR 087 To mend small and medium-size holes, trim ragged edges with the fabric grain. First stitch bock and forth across the hole from one side to the other with the machine running at high speed. Then turn the fabric at right angles and sew back and forth over preceding work with short stitches. This anchors the threads in the unworn area around the hole. Triangular tears are best darned with close stitches made across and lengthwise. 49