Pfaff ambition 1.5 Manual - Page 15
Threading the machine
View all Pfaff ambition 1.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Preparations Vertical position 5DLVHWKHVSRROSLQWRWKHYHUWLFDOSRVLWLRQ6OLGH on the large spool cap and place a felt pad under the thread spool. This is to prevent the thread from reeling off too fast. Do not place a spool cap on top of the spool pin as that would prevent the spool from rotating. $X[LOLDU\VSRROSLQ The auxiliary spool pin is used when winding a bobbin thread from a second spool of thread or for a second spool when sewing with a twin needle. Insert the auxiliary spool pin into the hole at the WRSRIWKHPDFKLQH$ 6OLGHRQDODUJHVSRROFDS and place a felt pad under the thread spool. Threading the machine Make sure that the presser foot is raised and the needle is in its highest position. 3ODFHWKHWKUHDGRQWKHVSRROSLQDQGÀWWKH appropriately sized spool cap. 3XOOWKHWKUHDGLQWRWKHWKUHDGJXLGHV% IURP back to front. Pull the thread between the WHQVLRQGLVFV& 3. Thread down through the right-hand threading slot and then upwards through the left-hand threading slot. 4. Bring the thread from the right into the take-up OHYHU' DQGGRZQLQWKHOHIWKDQGWKUHDGLQJ VORWLQWRWKHORZHUWKUHDGJXLGH( DQGWRWKH QHHGOHWKUHDGJXLGH) 5. Thread the needle. A Main spool pin in vertical position. Auxiliary spool pin. B D C E F 15