Pfaff ambition 1.5 Manual - Page 24

Settings

Get Pfaff ambition 1.5 PDF manuals and user guides View all Pfaff ambition 1.5 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

Settings In the settings menu, you can adjust the machine settings and screen settings. All settings are stored even when the machine is turned off. Settings menu 2SHQE\VHOHFWLQJWKHVHWWLQJVPHQXWDE6WHS between the available settings by pressing the up and down arrow buttons on the wheel. Preparations Twin needle 3UHVV2. % WRDFWLYDWH$FKHFNPDUNDSSHDUVLQ the box. Use the left and right arrow buttons on the wheel to set the twin needle width. The selected width is shown on the display. When a twin needle size is selected, the width of B all stitches is limited for that needle size to prevent needle breakage. A warning pop-up will be shown if you select a stitch that is too wide for the set twin needle size. Note: Some stitches, due to design and functionality, cannot be sewn with a twin needle. Overlock stitches, buttonholes and darning stitches are examples of stitches that are not suitable for twin needle sewing. A warning sound will be heard when trying to activate twin needle when such a stitch is selected. When activated, the twin needle icon will be shown in sewing mode. The setting is kept until you deactivate it. Note: Twin needle and stitch width safety cannot be used at the same time. When stitch width safety is selected, the outlines of the twin needle box will be dashed. 6WLWFKZLGWKVDIHW\ 3UHVV2. % WRDYWLYDWH 6HOHFWWKLVIXQFWLRQZKHQXVLQJDVWUDLJKWVWLWFK needle plate or a straight stitch presser foot to lock the center needle position for all stitches to prevent damage to the needle, presser foot or stitch plate. When activated, the stitch width safety icon will be shown in sewing mode. The setting is kept until you deactivate it. Note: When turning on the machine with this setting activated, a pop-up informs you that the machine is set for straight stitch. All stitches are limited to 0 mm stitch width. Stitch width safety and twin needle cannot be used at the same time. When twin needle is selected, the outlines of the stitch width safety box will be dashed. Contrast Use the left and right arrow buttons to adjust the contrast of the graphic display. The selected value is shown on the display. Language Press the left and right arrow buttons to change the language of all text in your machine. Software version Check the software version for your sewing machine. 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
24
Preparations
Settings
In the settings menu, you can adjust the machine
settings and screen settings. All settings are stored
even when the machine is turned off.
Settings menu
between the available settings by pressing the up
and down arrow buttons on the wheel.
Twin needle
the box. Use the left and right arrow buttons on the
wheel to set the twin needle width. The selected
width is shown on the display.
When a twin needle size is selected, the width of
all stitches is limited for that needle size to prevent
needle breakage.
A warning pop-up will be shown if you select a
stitch that is too wide for the set twin needle size.
Note: Some stitches, due to design and functionality,
cannot be sewn with a twin needle. Overlock stitches,
buttonholes and darning stitches are examples of stitches
that are not suitable for twin needle sewing. A warning
sound will be heard when trying to activate twin needle
when such a stitch is selected.
When activated, the twin needle icon will be
shown in sewing mode.
The setting is kept until you deactivate it.
Note: Twin needle and stitch width safety cannot be
used at the same time. When stitch width safety is
selected, the outlines of the twin needle box will be
dashed.
needle plate or a straight stitch presser foot to lock
the center needle position for all stitches to prevent
damage to the needle, presser foot or stitch plate.
When activated, the stitch width safety icon will
be shown in sewing mode.
The setting is kept until you deactivate it.
Note: When turning on the machine with this setting
activated, a pop-up informs you that the machine is set
for straight stitch. All stitches are limited to 0 mm stitch
width.
Stitch width safety and twin needle cannot be used at
the same time. When twin needle is selected, the outlines
of the stitch width safety box will be dashed.
Contrast
Use the left and right arrow buttons to adjust the
contrast of the graphic display. The selected value
is shown on the display.
Language
Press the left and right arrow buttons to change the
language of all text in your machine.
Software version
Check the software version for your sewing
machine.
B