Pfaff ambition 1.5 Manual - Page 39
Maintenance
View all Pfaff ambition 1.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Maintenance Cleaning the machine 7RNHHS\RXUVHZLQJPDFKLQHRSHUDWLQJZHOOFOHDQLWRIWHQ1ROXEULFDWLRQRLOLQJ LVQHHGHG Wipe the exterior surface of your machine with a soft cloth to remove any dust or lint built up. Wipe the screen with a clean, soft and damp cloth. Cleaning the bobbin area Note: Raise the needle, lower the feed dogs and turn off the machine. Remove the presser foot. Push the bobbin cover UHOHDVHEXWWRQ$ WRWKHULJKWDQGUHPRYH WKHEREELQFRYHU% DQGWKHEREELQ8VHWKH VFUHZGULYHUWRUHPRYHWKHWZRVFUHZV& LQWKH stitch plate. Lift up the stitch plate. Clean the feed dogs and the bobbin area with the brush found with the accessories. Cleaning under the bobbin area Clean the area under the bobbin case after sewing several projects or any time you notice an accumulation of lint in the bobbin case area. Remove the bobbin case by lifting it up and to the right. Clean the area with the brush or with a dry cloth. Put the bobbin case back into the hook race so that WKHWLSÀWVLQWRWKHVWRSSHU' Note: Do not blow air into the bobbin case area. The dust and lint will be blown into your machine. C B C A Tip! Inserting the screwdriver at the back of the bobbin case will help lift it up and make it easier to remove. Maintenance Replacing the stitch plate With the feed dogs lowered, replace the stitch plate and insert and tighten the two stitch plate screws. Replace the bobbin cover. D 39