Pfaff ambition 1.5 Manual - Page 16

16

Preparations

Needle threader

The needle threader allows you to thread the needle

automatically. The needle must be in its highest

position to use the built-in needle threader. Press the

needle up/down button to make sure the needle is

fully raised.

We also recommend lowering the presser foot.

1.

Use the handle to pull the needle threader all the

the needle eye.

3.

Let the needle threader gently swing back. The

hook pulls the thread through the needle eye and

forms a loop behind the needle. Pull the thread

loop out behind the needle.

Note: The needle threader is designed to be used for size

70-120 needles. You cannot use the needle threader for size

60 needles or smaller, wing needles or twin needles. There

are also some optional accessories that require manual

threading of the needle.

When threading the needle manually, make sure that the

needle is threaded from front to back.

Threading for twin needle

Replace the sewing needle with a twin needle. Make

sure that the presser foot is raised and the needle is in

its highest position.

appropriately sized spool cap. Insert the auxiliary

pad. Place the second thread on the spool pin.

back to front. Pull both threads between the

3.

Thread down through the right-hand threading

slot and then upwards through the left-hand

threading slot.

4.

Bring the threads from the right into the take-up

Place one thread into the slot on the left side of

into the slot on the right side of the needle thread

become twisted together.

5.

Thread the needles.

Note: The weight and irregular surface of specialty threads

such as metallic increases the amount of friction on the

thread. By reducing the tension, the risk of needle breakage

is prevented.

F

G

A

B

C

E

F

D

Pfaff ambition 1.5 Manual - Page 16

Needle threader, Threading for twin needle - 0 manual

Page 16 highlights