Pfaff ambition 610 Manual - Page 28
Sewing Mode
![]() |
View all Pfaff ambition 610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Sewing Mode 3 Sewing Mode Sewing mode is the first view on the graphic display after you turn on the machine. Your selected stitch will be shown in real size in the stitch field. Here you will find all the basic information you need to start sewing. This is also the menu where you adjust the settings of your stitch. Straight stitch is selected by default. Sewing Mode - Overview 1. Stitch field 2. Selected stitch number 3. Stitch width/stitch positioning 4. Stitch length/density Select a Stitch By pressing one of the direct selection buttons, you select that stitch number immediately. Press two or three digits in quick succession to select a stitch from 10 and up. If the stitch number does not exist, you will hear a beep and the last entered digit will be selected as a stitch. Use the up and down arrow buttons on the wheel to step between stitches. Sewing Recommendations Press the info button to show sewing recommendations for the current stitch. Press the button again to hide the information. 1. Needle recommendation/setting Universal needle Set for twin needle Wing needle recommended Set for stitch width safety 2. Presser foot recommendation 3. Stabilizer recommended 4. Feed dog/IDT™ system recommendation 5. Thread tension recommendation Note: All symbols and options will not be shown at the same time. 28
![](/manual_guide/products/pfaff-ambition-610-manual-e03e2e4/28.png)