Pfaff creative sensation pro II Manual - Page 11

2A - )DQF\VWLWFKIRRW When sewing decorative stitches or short zigzag stitches and other utility stitches with less than 1.0mm stitch length, use this foot. The groove on the underside of the foot is designed WRÁRZVPRRWKO\RYHUWKHVWLWFKHV 3 - Blindhem foot for IDT™V\VWHP This foot is used for blindhem stitches. The toe on the foot guides the fabric. The red guide on the foot is designed to ride along the fold of the hem edge. 4 - Zipper foot for IDT™V\VWHP This foot can be snapped on either the right or the left of the needle, making it easy to sew close to both sides of the zipper teeth. Move needle position to right or left to sew closer to zipper teeth. 5A - Sensormatic buttonhole foot When connected to the machine, the buttonhole is sewn in the length that has been entered into the machine. 5M - Manual buttonhole foot This foot is used for sewing manual buttonholes. Use the markings on the foot to position WKHJDUPHQWHGJH7KHÀQJHURQWKHEDFNRIWKHIRRWKROGVFRUGLQJIRUFRUGHGEXWWRQKROH 6A - (PEURLGHU\Sensormatic free-motion foot This foot is used for embroidery and free-motion sewing. This foot can also be used for darning. 6D - '\QDPLFVSULQJIRRW This foot is always recommended for embroidery. It is also used for free-motion sewing, quilting and embroidering on especially thick or spongy fabric. When using the Dynamic spring foot for free-motion, select Dynamic spring foot free-motion setting in the Freemotion options window in sewing mode. õTXLOWLQJIRRWIRUIDT™V\VWHP This foot is perfect for piecing and patchwork, especially when used in conjunction with the straight stitch needle plate. The distance from the needle to the outer edge of the right toe is 1/4" (6mm). The distance from the needle to the inner edge of the right toe is 1/8" (3mm). 8 - Maxi-stitch foot This foot is used for side-motion stitches. Important: Make sure that the IDT™ system is disengaged when using presser foot 2A, 5A, 5M, 6A, 6D and 8. 1:11 Introduction