Pfaff hobby 1016 Owner's Manual - Page 22

I44IiiR

Get Pfaff hobby 1016 PDF manuals and user guides View all Pfaff hobby 1016 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

Operaüng the machine Changing the needle Switch off the master switch (12). To remove: Lower the presser foot and set the needle to its highest point. Loosen the fixing screw (23) and pull the needle downwards. J PFAFF To insert: The flat side A of the needle must face to the rear. Lower the presser foot and insert the needle, pushing it up as far as it will go. Hold the needle and tighten the fixing screw (23) firmly. Setting the neecile thread tension Set the required amount of the needle thread tension (3) using the markings on the tension dial. The normal setting for sewing is 4-5. For embroidery and buttonhole sewing be tween 2 and 3. I44IiiR Lowering the feed dog For certain sewing work, such as sewing on buttons, the feed dog (22) has to be lowered. To do this, open the hook cover (19) and move the metallic slide to the right-hand position (B) by pushing it down wards and then to the right. To engage the feed dog, push down the slide and lock it into the left-hand position (A). I 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
Operaüng
the
machine
Changing
the
needle
Switch
off
the
master
switch
(12).
To
remove:
Lower
the
presser
foot
and
set
the
needle
to
its
highest
point.
Loosen
the
fixing
screw
(23)
and
pull
the
needle
downwards.
To
insert:
The
flat
side
A
of
the
needle
must
face
to
the
rear.
Lower
the
presser
foot
and
insert
the
needle,
pushing
it
up
as
far
as
it
will
go.
Hold
the
needle
and
tighten
the
fixing
screw
(23)
firmly.
Setting
the
neecile
thread
tension
Set
the
required
amount
of
the
needle
thread
tension
(3)
using
the
markings
on
the
tension
dial.
The
normal
setting
for
sewing
is
4-5.
For
embroidery
and
buttonhole
sewing
be
tween
2
and
3.
Lowering
the
feed
dog
For
certain
sewing
work,
such
as
sewing
on
buttons,
the
feed
dog
(22)
has
to
be
lowered.
To
do
this,
open
the
hook
cover
(19)
and
move
the
metallic
slide
to
the
right-hand
position
(B)
by
pushing
it
down
wards
and
then
to
the
right.
To
engage
the
feed
dog,
push
down
the
slide
and
lock
it
into
the
left-hand
position
(A).
J
PFAFF
I44IiiR
I
18