Pfaff hobby 1016 Owner's Manual - Page 7
Notes, safety, domestic, sewing, machines - parts
View all Pfaff hobby 1016 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Notes on safety for domestic sewing machines The machines meet the relevant safety requirements. 1. The user must exercise adequate caution with regard to the up-and-down movement of the needle and constantly observe the sewing area during work. 2. When leaving the machine, during mainte- nance work or when changing mechanical parts or accessories, always disconnect the machine from the main power by unplugging the lead cord from the wall outlet, 3. The maximum permissible wattage for the sewing lamp is 15 watts. 4. An authorized PFAFF mechanic only must adjust the tension of the belt drive, 5. The machine must be put into operation according to the indications on the specifica- tion plate. 6 Do not insert any oblects into openings on the machine, 7. Do not use the machine if: • there is visible damage its' functioning is disturbed, • it is wet, i.e. condensation which can occur when a cold machine is installed in a warm room. 8. To unplug lead cord from wall socket, grasp the plug close to the wall. Do not pull the main plug out of the wall socket by the cord. 9 If the appliance is used for the wrong purpose or incorrectly operated, no liability can be accepted for any possible damage. 10. To avoid the risk of electric shock, do not open the machine There are no parts in side the machine that the user can repair. This is solely the responsibility of our quail- fled service staff. 11 Be sure to use only PFAFF original parts 12. The machine is designated for a mains supply with a nominal voltage of +1- 10% and a rated frequency of 1- 4 %. 13. When used properly, the temperature of the outer components of a non-electroni cally controlled foot control can reach up to 85°C. Constant use at a low speed is therefore not permitted in order to avoid damage. 14. According to the laws concerning electro magnetic compatibility, no liability can be accepted for any mains interruptions cau sed, should the mains power line be chan ged or should changes be made to it. Environment The recommended environment is: Ambient temperature 50°F (10°C) to 104°F (40°C) Humidity: 20% to 80% Storage temperature - 13°F (- 25°C) to +140°F (60°C). The machine is insensitive to interference, but it should not be used in the direct vicinity of elec tronic appliances such as radios, televisions, personal computers, radio transmitters, etc. This machine is a high quality electronicmechanical appliance, It is a machine for su pervised use in the home. It should be operated in such a way that it is not subjected to: dust, severe dampness, direct sunlight, static elec tricity, heat-producing oblects, corrosive chemi cals or liquids. For ventilation purposes the machine must be used on an unobstructed, solid, level surface. Treatment Always avoid damage to the machine by protecting it against hitting or dropping. Cleaning Housing: For cleaning the housing use a dry, clean. soft lint-free cloth. To remove any stubborn dirt, use a soft cloth with alcohol, Please note! Do not use any insecticides or chemical pro ducts such as petrol (gas) or low-viscosity che micals for cleaning the housing.