Pfaff powerquilter p3 PowerQuiltertm p3 Pillow Project - Page 5

7. Touch Zoom/Zoom All. 8. Remove pins. You will want to keep an eye on the edges of your quilt block and hold them down with your fingers if necessary. 9. Touch the Green Circle at the top middle of the screen. Stitch the pattern following the directions on the screen. When finished stitching, pull up your bobbin thread to the top and cut threads. Quilt Right Side Border 1. Touch the Edit Icon/Mirror/Vertical. 2. Move the machine to the lower inner corner of the rectangle block on the right side of the large square. Place your needle in the right rectangle, in the same location visually as where the design started stitching on the left rectangle. 3. Touch the Edit Icon/Properties/Retrieve Start Point/OK. This step allows you to tell the system where you want to start stitching without having to reset a pattern box. You may not be able to see your design on the screen - that is OK. The screen is still at your last pattern box. 4. Remove pins. 5. Touch the Green Circle at the top middle of the screen. Stitch the pattern following the directions on the screen. When finished stitching, pull up your bobbin thread to the top and cut threads 6. Touch the Edit Icon/Remove/Yes Quilt Center Square 1. Touch Home/Pattern Box/Adjust Current. Make a pattern box for the center square following the directions on the screen. 2. Touch Home/Add Pattern/Baroque/Bar1blk/Select. 3. Touch Edit Icon/Scale/Smartscale/Yes. 4. Touch the Green Circle at the top middle of the screen. Stitch the pattern following the directions on the screen. When finished stitching, pull up your bobbin thread to the top and cut threads 5. Touch the Edit Icon/Remove/Yes 6. Roll quilt and check rail height. 5 ©2013 KSIN Luxembourg ll, S.ar.l. PFAFF, QUILT ARTIST, POWERQUILTER and INSPIRA are exclusive trademarks of KSIN Luxembourg ll, S.ar.l. All rights reserved.