Pfaff tipmatic 6150 Owner's Manual - Page 37
Pfaff tipmatic 6150 Manual
View all Pfaff tipmatic 6150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
prog a Taste3 - b - - HLi C' 3 0/1 - - - - Basting stitch (Mode) 6230) With key (3) basting you can baste a gar ment before trying it on. When you press the foot control the machine will only make one stitch. For each further stitch you have to press the foot control each time, Lower the bottom feed and disengage the - top feed. Place the fabric under the sewing foot. - Sew one stitch, then pull the fabric to the - rear by the required amount. Repeat this as many times as you need to - finish the work. TIP: To prevent the material plies from shifting, insert dress pins crosswise to the basting direction, Light fabrics are easier to baste with long straight stitches (6 mm). Then you do not need to lower the bottom feed. Straight stitch Program G is the basic straight stitch with middle needle position. The stitch length can be increased up to 6 mm as required. Some sewing jobs can be done easier by changing the needle position, e.g. topstitching a collar or sewing in a zipper. You have a choice of three needle positions. Needle position on the left - release all the keys with key B. Needle position in the middle - key G Needle position on the right - key H and I When adjusting the position of the needle please make sure it is in the highest position. 36