Pfaff tipmatic 6150 Owner's Manual - Page 70
Pfaff tipmatic 6150 Manual
View all Pfaff tipmatic 6150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Eyelet embroidery Traditional eyelet embroidery which long ago had to he made laboriously by hand can be made quite easily with the help of an eyelet plate Ispecial accessory). This is very etfective on blouses, bed or table linen Practically all stitch types are suitable for this utility stitches such as a zigzag stitch, blind stitch, elastic stitch or fancy stitches (Models 6150, 6230). For classic eyelet embroidery, program E or F are very suitable. Remove the sewing foot. Set the presser bar lifter in darning position - Isee page 511. Place the eyelet plate on the needle plate, - making sure pin A fits in the middle cutout of the needle plate. Then push the plate down at the tront. Place the marked fabric taut in an embroi - dery hoop. Cut one or two of the fabric threads and push the fabric over the pin in the eyelet plate. The fabric must fit snugly around the pin. Draw up the bobbin thread and hold it for the first few stitches. You can now stitch around the cut with the - selected program. By doing this it is impor tant to turn the fabric slowly and evenly. The stitches should be very close to each other Afterwards secure with straight stitches. - liP: If you choose another program, e g. a fancy stitch with model 6150 or 6230 or a blind stitch, the cut will only be partly stitched around, or not at all. To complete this, just select key A afterwards and stitch evenly around the cut. 68