Philips 32HF7965D User manual - Page 30

Installation • The ESP (Energy Saving Programmability) option allows you to select a specified period of time (from 1 HR / 2 HR 99 HR) to power down your TV automatically. If it does not receive any commands during this period from the remote control or the TV keyboard, this energy saving feature will take effect. Note : If a remote or keyboard command is received before the ESP time period expires, the Timer will reset and begin counting down again. CHACNONTERLOINL STALL ESP 2 DIGIT TIMEOUT 3 . 0 3 DIGIT ENTRY NO SOURCE MENU ITEM NO CHANNEL GUIDE NO MIN VOLUME 10 MAX VOLUME 35 • The DIGIT TIMEOUT option allows you to specify a time period (from 1 second to 9.9 seconds) for the channel to switch to another channel when you key in the channel number. It is advisable not to specify too short a time period especially when you want to key in 2 digit channel number. For example, if you specify a 1 second time period, you may not have enough time to key the second digit as the channel will switch after you key in the first digit. Note : The recommended and default setting is 3.0 seconds. 28 CHACNONTERLOINL STALL ESP DIGIT TIMEOUT 3 DIGIT ENTRY SOURCE MENU ITEM CHANNEL GUIDE MIN VOLUME MAX VOLUME 2 3 . 0 NO NO NO 10 35 • In the 3 DIGIT ENTRY option, select YES to enable channel selection of 1 to 250 for cable mode and 2 to 250 for antenna mode. Select NO enable channel selection of 1 to 99 for cable mode and 2 to 99 for antenna mode. CHACNONTERLOINL STALL ESP 2 DIGIT TIMEOUT 3 . 0 3 DIGIT ENTRY YES SOURCE MENU ITEM NO CHANNEL GUIDE NO MIN VOLUME 10 MAX VOLUME 35 • The SOURCE MENU ITEM option allows you to remove Source from the options menu the guest can see. The guest will not have access to any inputs not mapped to a channel in this case. • If YES is selected, the Source line item will appear in the options menu. If you select NO, the Source line item will not appear.