Philips 32HF7965D User manual - Page 38

Appendix A - Multi Remote Controls Support Programming the Multi Remote Controls function Multi RC function supports up to four TV sets operating in one room without any interference from each other remote controls. Each Guest Remote Control must be programmed individually to one of the four color (Blue, Yellow, Green and Red) buttons on the remote control. 1. Press the button on the GREEN remote control to activate the TV SETUP Menu. 2. Press the > button to select COMMUNICATION. SETUP LANGUAGE COMMUNICATION CHANNEL INSTALL AUTO INSTALL TV CABLE TUNING USE CHANNEL TABLE CURRENT RING DIGITAL SETUP CONFIGURATION ENGLISH > > > NO NO RING1 > > 3. Press the > button to enter the COMMUNICATION menu. COMMUNICATION COMMUNICATION MULTI RC STORE > REMOTE CONTROL BLUE 4. Press the > button repeatedly until MULTI RC is selected. 5. Press the > button to select REMOTE CONTROL. 36 COMMUNICATION COMMUNICATION MULTI RC STORE > REMOTE CONTROL YELLOW 6. Press the > button repeatedly to toggle through the four colors and select your preferred color. 7. Press the < button to select STORE and press the > button to store your selection. Press the button to exit menu. 8. Using the Guest Remote Control, press the MENU and the YELLOW buttons simultaneously to set the remote control to the corresponding color that you have selected in the REMOTE CONTROL option. If BLUE color is selected at the REMOTE CONTROL option, correspondingly, you must select BLUE color button on the Guest Remote Control. You can now use the Guest Remote Control to operate the TV set. 9. To check whether you have programmed the MULTI RC function correctly, press the OK button on the Guest Remote Control for five seconds. Information of the Remote Battery, Remote Color and the TV Color will be shown on the screen. If the Remote Color and the TV Color do not match, you need to re-programme and ensure they match to enable the Guest Remote Control to operate the TV.