Philips 46PFL5706/F7 User Manual - Page 37

8 Update your TV software Philips continuously tries to improve its products and we strongly recommend that you update the TV software when updates are available. New software can be downloaded from our website at www.philips.com/support using the model number of yourTV (e.g. 55PFL5706) to find information. Checking your current software version 1 Press MENU on the remote control and then use to select [Setup] > [Software] > [Software information] > [Select]. » The version and a description of the current software is displayed. Picture Sound Features Installation Software information Software update Netflix deactivation Netflix ESN VUDU deactivation MediaConnect code XXXXX Software 2 Press MENU to exit. Preparing for the software update by USB You require the following equipment : • A PC with web browsing capability. • An archive utility that supports the ZIP-format (e.g.WinZip for Windows or StuffIt for Mac OS). • An empty clean formatted USB stick. Note • Only FAT / DOS-formatted portable memory is supported. • New software can be downloaded from www.philips.com/support • Use only software updates that can be found on the Philips web site. Warning • When the software update is running, don't press any buttons. • Do not remove the USB storage device during the software update. • If an error occurs during the update, retry the procedure or contact your dealer. Downloading the software 1 On your PC, open a web browser and go to www.philips.com/support 2 Find information and software related to your TV and download the latest software update file to your PC. 3 Decompress the ZIP-file. 4 Copy the update file to the root directory of the USB storage device. Updating software USB update You can update the software by using USB storage device. 1 If the TV is on, press . POWER at the side of the TV. 2 Connect your USB storage device with the update file to the USB port on the side of your TV. 3 Switch on the TV. 4 Press MENU on the remote control and then use to select [Setup] > [Software] > [Software update] > [USB]. 5 Use Î/ï to select the desired Update file. 6 Use Î/ï to select [Yes], then press OK. 7 Read the on-screen instructions and confirm that you want to continue with the installation. Software update is in progress. Please wait. Do not remove the USB storage device or turn the TV off while upgrade is in progress. Update your TV with new software: 8 When the software update is complete, remove the USB storage device. 9 Unplug the AC power cord for a few seconds from AC outlet and plug it again. 10 Switch on the TV. » The TV starts up with the new software. • The following messages are displayed without starting software update when it doesn't fulfill the update conditions. Select a file No valid software file on the USB. Chec Error OK 36 EN