Philips AC5659 User manual - Page 11

English Controls overview (fig.b) Control buttons I Power on/off button J Light dimming button K Auto mode button L Fan speed button M Child lock button N Reset button Display panel: Sleep mode Speed 1 Speed 2 Speed 3 Turbo mode Filter replacement alert Pre-filter cleaning alert Wi-Fi indicator Gas display PM2.5 display Indoor Allergen Index General mode Allergen mode Bacteria&Virus mode Child lock indicator 3 Getting started Installing the filters Note •• Make sure the air purifier is unplugged from the electrical outlet before installing the filters. •• Make sure the side of the filter with the tag is pointing towards you. 1 Pull the top part of the side panel to remove it from the the air purifier (fig.c). 2 Press the two clips down (1) and pull the pre-filter towards you (2) (fig.d). 3 Remove all filters (fig.e). 4 Remove all packaging materials from the filters (fig.f). 5 Place the thick HEPA filter (FY5185) into the air purifier and then the thin activated carbon filter (FY5182). The model numbers are shown on each filter (fig.g). 6 Attach the pre-filter back into the air purifier (fig.h). Note •• Make sure the side with the two clips is pointing towards you, and that all hooks of the pre-filter are properly attached to the purifier. 7 Reattach the front panel by pressing the top part of the panel onto the top of the air purifier (1). Then, gently push the panel against the body of the air purifier (2) (fig.i). EN 9