Philips AJ260 User manual - Page 11

Sleep Weather forecast Switching off the alarm There are three ways of switching off the alarm. Unless you choose to cancel the alarm completely, the DAILY ALARM RESET option will be automatically kept activated from the time your alarm first goes off. call at the same time for the following day: Weather forecast The unit is capable of detecting atmospheric pressure changes. Based on the collected data, it can predict the weather in the next 12 to 24 hours.The effective range covers an area of approximately 30 to 50 km. Daily alarm reset • Each weather forecast status will be displayed If you want the alarm to be stopped with graphical animation and different lighting immediately but also wish to repeat the alarm colors at the top left hand corner of the unit, 1 During the alarm call, press once see the figure below. SLEEP/ALARM RESET or RADIO ON/OFF. About color lighting - Battery operation:The light turns on for 10 Repeat alarm seconds after each atmospheric measure- This will repeat your alarm call at 9-minute ment, or after any button pressed. intervals. - AC operation:The light always turns on 1 During the alarm call, press REPEAT ALARM/BRIGHTNESS CONTROL. when the power is switched on.To let the light turn on just like the case of battery operation mentioned above, press and hold Switching off the alarm completely REPEAT ALARM/BRIGHTNESS Press once or more corresponding CONTROL for about 10 seconds. ALM 1 or ALM 2 until disappears. LCD display Light color Sleep The clock radio has a built-in sleep timer, which enables the set to be automatically switched off during radio playback after a set period of time. Setting the sleep time 1 During radio playback, set your timer by pressing repeatedly SLEEP until the desired timer option appears. ➜ Selections are follows (time in minute) 10=20=30=60=90=120=OFF= 10 2 The set will turn off automatically at the selected time. 3 To cancel the timer function, either press SLEEP once or more until "OFF" appears, or press RADIO ON/OFF to switch to standby. ➜ "SLEEP" disappears when sleep function is cancelled. Note: - The sleep function does not affect your alarm time setting(s). Sunny Partly cloudy Cloudy Rainy Stormy Snow Amber Light blue Blue Purple Red White