Philips AJ260 User manual - Page 13

Safety and maintenance

Page 13 highlights

Safety and maintenance Safety and general maintenance • If you do not intend to use the clock radio for a long time, withdraw the power cord from the wall outlet. • Place the set on a hard and flat surface so that the system does not tilt. • Install the unit near the AC outlet and where the AC power plug can be easily reached. • The apparatus shall not be exposed to dripping or splashing • Do not expose the set, batteries, to humidity, rain, sand or excessive heat caused by heating equipment or direct sunlight. • No objects filled with liquids, such as vases, shall be placed on the appartus. • No naked flame sources, such as lighted candles, should be placed on the apparatus. • Do not cover the set. Adequate ventilation with a minimum gap of 6 inches between the ventilation holes and surrounding surfaces is necessary to prevent heat build-up. • The mechanical parts of the set contain self-lubricating bearings and must not be oiled or lubricated. • To clean the set, use a soft dry cloth. Do not use any cleaning agents containing alcohol, ammonia, benzene or abrasives as these may harm the housing. Environmental information All unnecessary packaging material has been omitted.The packaging can be easily separated into three materials: cardboard, polystyrene and plastic. Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging, dead batteries and old equipment.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15

Environmental information
All unnecessary packaging material has been omitted.The packaging can be easily separat-
ed into three materials: cardboard, polystyrene and plastic.
Your set consists of materials which can be recycled if disassembled by a
specialized company. Please observe the local regulations regarding the
disposal of packaging, dead batteries and old equipment.
Safety and general
maintenance
If you do not intend to use the clock radio
for a long time, withdraw the power cord
from the wall outlet.
Place the set on a hard and flat surface so
that the system does not tilt.
Install the unit near the AC outlet and where
the AC power plug can be easily reached.
The apparatus shall not be exposed to drip-
ping or splashing
Do not expose the set, batteries, to humidity,
rain, sand or excessive heat caused by heat-
ing equipment or direct sunlight.
No objects filled with liquids, such as vases,
shall be placed on the appartus.
No naked flame sources, such as lighted
candles, should be placed on the apparatus.
Do not cover the set. Adequate ventilation
with a minimum gap of 6 inches between the
ventilation holes and surrounding surfaces is
necessary to prevent heat build-up.
The mechanical parts of the set contain
self-lubricating bearings and must not be
oiled or lubricated.
To clean the set, use a soft dry cloth. Do not
use any cleaning agents containing alcohol,
ammonia, benzene or abrasives as these may
harm the housing.
Safety and maintenance